Double girder and single girder overhead traveling cranes for outdoor and indoor use. The dimensions of the cranes maximally adapted to the already designed spaces. All cranes technical specifications (speeds, working loads, performance, etc.) selected in accordance with the client’s maximum needs for the most productive work and safe work requirements.
Cranes equiped with ABUS Kransysteme GmbH, Germany crane components.
1 pce. Double girder EOT crane, type ZLK for outdoor use:
- 16 t x 18 m
- lifting height up to 10 m
- 75 m crane electric power supply system – closed conductors from Wabtec Netherlands B.V.
Additional equipment: hoisting and traveling motors, as well as control cabinets equipped with heaters and anti-condensation devices from ABUS; crane and hoist traveling movements are of soft start and stop controlled via smooth starting units and smooth switching relays ABUS AZS SU1 and SU2, all crane components protected from atmospheric effects, rain, snow. In accordance with safety requirements crane protection device is installed at the end of the runway track – a crane lock, which protects the crane from accidental movements in the event of adverse weather conditions or during non-operation. Telecrane Srl. distance radio remote control: two-stage button transmitter with receiver and the reserve transmitter.
1 pce. Double girder EOT crane, type ZLK for use indoor / outdoor:
- 32 t x 25 m
- lifting height up to 8 m
- 94 m cranes electric power supply system – closed conductors from Wabtec Netherlands B.V.
Additional equipment: hoisting and traveling motors, as well as control cabinets equipped with heaters and anti-condensation devices from ABUS; cranes (additional crane ELK 10 t x 25 m on same track) equipped with the anti-collision system with traveling speed slowing and shut down with the preset distance between the cranes. Telecrane Srl. distance radio remote controls: two-stage button transmitters with receivers and the reserve transmitters.
3 pcs Single girder EOT cranes, type ELK for outdoor use:
- 10 t x 25 m
- lifting height up to 10 m
- 78m cranes electric power supply system – closed conductors from Wabtec Netherlands B.V.
- 60 m cranes electric power supply system – closed conductors from Wabtec Netherlands B.V.
Additional equipment: stepless hoisting speeds are controlled via frequency converters ABULinear; power and control cables are protected placed in the flexible energy supply chain ABUPowerline made from PVC. Telecrane Srl. distance radio remote controls: two-stage button transmitters with receivers and the reserve transmitters.
3 pcs. Crane runway track rails:
- 149 m / 60 x 60 mm
- 464 m / 70 x 70 mm
Prepared and installed onto the runway beams preinstalled by the Customer. Thermally and mechanically damaged surfaces during the rail installation were primed and painted in accordance with the Customer’s requirements.
Operation location: outdoor (wet, dusty, non-chemically aggressive environment), indoor / outdoor (wet, dusty, non-chemically aggressive environment), indoor – without spec. requirements.